注册 | 登陆
浏览模式: 标准 | 列表全部文章

[置顶] 关于freedompop

注册图文攻略:

https://goo.gl/pRgqp9

https://drive.google.com/open?id=0B0OvAaCqFAeXcEZ2aVlRMllOdkU

 全球可用的地区和国家 http://www.freedompop.com/worldwide

经常会有促销,最好一个人集齐11张卡,就可以愉快的和自己玩耍了。

4G ATT https://www.freedompop.com/offer/LTEsimvoice-affpromo

https://www.freedompop.com/offer/simvoice-sdcardbonus

https://www.freedompop.com/offer/voicesimstick

sprint 入网  https://www.freedompop.com/byodpromo5

https://www.freedompop.com/offer/pennysimaffpromo  0.01

https://www.freedompop.com/offer/simvoice-sdcardbonus

https://www.freedompop.com/offer/voicesim99banner  【0.99包邮】

http://www.freedompop.com/offer/voicesimpromo  【4.99包邮】

https://www.freedompop.com/offer/stickvoicepromo 【已经过期】

https://www.freedompop.com/offer/labordaysim 【已经过期】

https://www.freedompop.com/offer/bfvoicesimbonus  $0.25

https://www.freedompop.com/offer/voice2gbbonuspromo

ebates有$5的cb拿 https://www.ebates.com/r/021815

激活 https://support.freedompop.com/app/answers/detail/a_id/3017/kw/carrier%20reset

查询 https://www.freedompop.com/account/device_list.htm

port信息 https://my.freedompop.com/settings/port-out-info

IOS 设置 http://www.freedompop.com/iOSAPN

There will be a temporary authorization charge of $29.98 applied to your credit card upon signing up. This authorization is cancelled immediately. Funds back to your account within a few business days. (Note: if you opt out of Premier when you order, then the authorization will be $19.99).
After signup, cancel following non-free stuff services:
1) Cancel Premier trial: You might opt-out at sign-up, if not go to "My Account" (password in your email) > Services > Premier service > Deactivate near bottom right corner
2) Downgrade data plan: Go to My Account > Plans and click on link for your current plan in the "My Plan" section. On details page, look a tiny downgrade link ("To downgrade your plan, click here") at the bottom.
3) Cancel Auto Top Up: My Account > Billing > Billing Settings > Auto Top-up > Edit > Off
4) Turn off "3rd party email contacts": My Account > Update Account Settings > go to bottom > e-mail preferences

如果需要加好友,直接把这里的信箱加上去就可以了

http://slickdeals.net/f/5276432-freedompop-friends?v=1

开户和设定:【转帖thymetime】
sd上常有0.99包邮的deal,买11张,需要至少3张信用卡,每张卡开5张后就开始报错。
每个邮箱对应一个卡,互加好友,11张卡保证每张卡都可以加满10个好友,获得500m流量
每个账户手动降级plan和service,降到200m完全免费版
每个账户获得700m流量,每个月用5个账号各自赠送100m去账号1,另外4个账号赠送去
账号2,这样可以保证有2个账号超过1g流量。我不是流量大户,够用了。
自由泡的卡插上手机设置apn,打开漫游数据即可使用,app我是没装,app有点问题,
有时候影响正常电话使用。

==================================

 ytysh (BNNY) 于 (Sun Oct 11 23:45:54 2015, 美东) 提到:

很多人反映Freedompop的Voice Quality不好,于是参考Freedompop论坛上的以前版本
优化资料结合自己亲自尝试,发现以下设置可以明显优化通话质量:
1.打开Freedompop Messaging,点击左上角三道杠打开菜单,点击倒数第二项Setting,
2.在Audio项内勾选Echo cancellation,Adaptive rate control以及Codecs里面所有
选项
3.在Audio项内的Acaptive rate algorithm选择Stateful,Codec bitrate limit选择
128kbit/s,
4.Call选项保持默认设置,无需改动
5.在Network项内,仅勾选Use random ports和Enable push notifications两项
完成后测试:可以拨打909-390-0003进行测试,此电话将回放接收到的声音

===============================================

FreedomPop账号提取SIP信息的办法

android 机 root后,直接读取 /data/data/com.freedompop.phone/database/com.freedompop.phone.db 里面有你的用户名和密码

ios   越狱后,读取 /com.freedompop.freedompoptalkandtext/Documents/.linphonerc   【这个办法超级简单,都不用去下载数据库浏览软件】

www.obitalk.com,设置办法 log on, on OBI device configuration, set up sp2, 
config type select generic service provider, 
Service provider proxy server: fp.layered.net
outbound proxy server fp.layered.net
user name: 1xxxx_Axxxx(get from your accouts table)
password: xxxx
URL:   fp.layered.net

click save.
When you make a call to china, dial ** 2 to select Voice Service Provider 2,
Like: **201186xxxxxxxxx

===============================================

提交support ticket

https://support.freedompop.com/app/account/questions/list

 

网络设置

安装 FREEDOMPOP MESSAGING

然后 在 APN 设置为  freedompop.foggmobile.com

然后打开roaming漫游

或者访问 http://www.gxgx.org/a.mobileconfig

http://www.unlockit.co.nz/

 

http://www.mitbbs.com/article_t2/CellularPlan/5857.html

http://www.cranialborborygmus.com/FreedomPop-LTE-gsm-sim-review.htm#FreedomPop-Service-Downgrade-BUG

[置顶] linux下几个lnmp一键安装包

wdlinux

安装方法:
一 RPM包安装(超简单超快速,强烈建议新手用此方式安装)
wget http://www.xreacn.com/linux/cp/wdlinux/rpm_install

sh rpm_install
然后按提示选择安装lamp or lnmp
即开始安装,5分钟左右

二 源码安装
wget http://www.xreacn.com/linux/cp/wdlinux/lanmp.tar.gz
tar zxvf lanmp.tar.gz
sh lanmp.sh

----------------------------------------------------------------------------------------

imcat

tar zxvf lnmp1.5.tar.gz
 

----------------------------------------------------------------------------------------

lnmp

wget -c http://www.xreacn.com/linux/cp/lnmp0.7-full.tar.gz 

或者 wget -c http://soft.vpser.net/lnmp/lnmp0.7-full.tar.gz

安装办法 http://www.xreacn.com/linux/cp/lnmp/

----------------------------------------------------------------------------------------

LLsMP

Centos:
wget http://llsmp.googlecode.com/files/llsmp0.6beta.tar.gz;tar zxvf llsmp0.6beta.tar.gz;cd centos;sh install.sh

Debian
wget http://llsmp.googlecode.com/files/llsmp0.6beta.tar.gz;tar zxvf llsmp0.6beta.tar.gz;cd debian;sh install.sh

安装 http://llsmp.org/

帮助文件 http://38.73.83.45/ 或者 http://www.xreacn.com/linux/cp/llsmp/index.html

----------------------------------------------------------------------------------------

Bootstraping Low End VPS with Pre-built Scripts

# wget -q http://www.lowendbox.com/scripts/lowend-debian.sh 

或者wget -q http://www.xreacn.com/linux/scripts/lowend-debian.sh

帮助 http://www.lowendbox.com/blog/bootstraping-low-end-vps-with-pre-built-scripts/

http://www.lowendbox.com/blog/yes-you-can-run-18-static-sites-on-a-64mb-link-1-vps/

http://www.lowendbox.com/blog/wordpress-cheap-vps-lowendscript/
# bash ./lowend-debian.sh

[置顶] 几个序列号

这篇日志被加密了,请输入密码后查看。

2018.7.21 卡贴机解锁

 http://www.ideallte.com/list-20-1.html
卡贴+电话卡装入手机(等待左上角变无服务/或出现信号格)-按下HOME键点击紧急呼叫-输入引导指令 *5005*7672*5858# 拨打
 
7.21 
 
89014 10427 78060 43133 

iphone上安装deb文件,deb文件安装教程

 将苹果手机与电脑连接,打开iTools,点击文件系统-越狱系统,打开文件路径:/var/root/Media/Cydia/AutoInstall,将deb格式文件导入到该文件夹当中。

iphone 定时开关机app

 越狱之后可以。

  方法:
  1、打开手机,继续打开Cydia。
  2、在Cydia界面右下角点击“搜索”选项,进入搜索软件/插件界面。
  3、在搜索框输入软件名“atimetool”,点搜索,然后在下拉出的结果中选择要安装的项。
  4、在打开的软件详情页面右上角点击“安装”。
  5、继续点击“确认”。
  6、静静地等待程序下载和安装,接着点击“重启springboard”。
  7、打开软件,尝试在“定时任务”模式下创建一个定时关机功能。点击界面右上角的小+号。
  8、在添加的设置页面进行“重复”日期设置,这里设置晚上10点30分。然后在“服务”一项中选择“电源”。注,下面一项选择“关闭”,意思指“关闭电源”,这里容易与关闭此任务混淆,引起误解。
  9、点击存储后就成功添加一个定时关机任务。

PDANET

E-mail: sp4m@xsellize.com 

6BFC-6B04-6107-8769-841C

Serial: PDANETAPPL-6BFC-6B04-6107-8769-841C

dcx3200-m

http://10.1.10.1
cusadmin
highspeed
 
 vmax web viewer 
http://10.1.10.211
admin
 
https://10.1.10.251/login.cgi
UBNT
UBNT
 
First, you must be directly connected via any Computer / Laptop via ethernet cable to any Lanport 1-4 of the Comcast Gateway. Then yuu should bring up a browser and in the address field just type in 10.1.10.1, then when the login screen appears use username=cusadmin/password=highspeed.  If you are not using any Comcast Static IPs, then another option is for you to depress the little black button on the back of the Comcast Gateway (CG) for 15 seconds minimum and this should reset all options to factory defaults including your login username and password.
 
 
 
If this does not work then you must call 800-391-3000, use high speed internet technical or Change Of Service option, then ask the technical agent to reset your login password.
Records:112612345678910»